Octave Copy Master II User Manual page 32

At this point, the next screen that you will see depends on the Master Reading
Source that you have selected. If you selected either the Reader port or the
Writer port, the Copy Master II will ask to see the master disc for verification:
Preparing...
Waiting for Master
If you selected the Hard Disk Drive as the Master Reading Source, the Copy
Master II will proceed directly to the Waiting for Blanks screen:
Preparing...
Waiting for Blanks
Preparing...
7 Disc Detected, Go?
Verifying
0
PASS 1 FAIL 0 (
Waiting for Blanks
32
The duplicator requests the master disc
first. Once it has read the master, it re-
quests the blank discs.
Allow 5-10 seconds for the duplicator to
detect your blank discs. After the discs
have been recognized, you will see a
screen similar to this:
The "7" indicates that the duplicator
recognized seven discs in the writer
tray. The actual quantity may be differ-
ent on your machine. Once the discs are
detected, the Copy Master II starts the
verification process.
21 MB
The "21 MB" indicates the size of the
master. The "0" indicates that zero discs
38%
have passed verification so far (not sur-
prising since this is the first). The
"38%" indicates that it is 38% through
the verification process.
1)
When the verification process is com-
plete, it indicates whether the disc(s)
passed or failed, and the total number of
good discs tested so far.
Copy Master II User's Guide
Octave Systems Inc