Editing Names - Octave Copy Master II User Manual

Setting Counters and Assigning Names

7.2 Editing Names

When you create either a new user or a partition, you need to assign
a name to it. The example shown here shows how to name or rename
a partition, but the process for naming or renaming a user is identi-
cal.
After you have created the partition, you will see the Edit Partition
Name menu:
Edit Partition Name
[ ] OK?
The name for a partition can be up to eight characters long, and the
characters can be any alpha (A...Z) or numeric (0...9) value. For ex-
ample, if you want to name the partition for your master disc as
"FUN". Then follow this example:
Press the
■
can also hold the
scroll through the alphabet.)
Press the
■
tion.
Press the
■
Press the
■
tion.
Press the
■
Press the
■
tion.
Once you have the name "FUN" displayed and then, press the
■
Enter button repeatedly until the cursor is moved to "OK".
Then press the
■
You will now see the following confirmation screen:
Loading Partition?
[FUN ] OK?
Octave Systems Inc.
To enter the name, use the
Down buttons to select the character
and use the
to move the cursor position. Once
you've finished, move the cursor to
"OK" and press the
Down button repeatedly until "F" is displayed. (You
Down button down, and the duplicator will
Enter button once to move the cursor to the next posi-
Down button repeatedly until "U" is displayed.
Enter button once to move the cursor to the next posi-
Down button repeatedly until "N' is displayed.
Enter button once to move the cursor to the next posi-
Enter button once to submit your name selection.
Press the
Enter or ESC buttons
Enter button.
Enter button to confirm.
Up or
19