Select Loading Drive; Format Hard Drive - Octave Copy Master II User Manual

The Auto option sets the partition to the largest size that the installed CD/
DVD readers and writers can accommodate.
If you have a 16x speed or higher duplicator with double layer/dual layer
DVD9 capabilities, the hard drive partitions are set at a default size of 9 GB
each to accommodate the expanded size of the DVD9 format. If you require
more partitions and do not plan on copying double layer/dual layer DVD9
media, you can change the hard drive partition size to CD (1 GB) or DVD
(5 GB).

10.7 Select Loading Drive

The Select Loading Drive menu option selects whether the Reader (Port 1)
drive or the Writer (Port 2) drive will be used when loading a Hard Disk Drive
partition. To select the loading drive, use the
navigate to the 7. Select Loading Drive menu:
Hard Drive Setup
7.Select Loading Dr
Select Loading Drive
Reader Port 1

10.8 Format Hard Drive

The Format Hard Drive formats the Hard Disk Drive. It deletes all disc imag-
es and re-initiates the drive. To format the Hard Disk Drive, use the
Down buttons to navigate to the 8. Format Hard Drive menu:
Hard Drive Setup
8. Format Hard Drive
Format Hard Drive
Press OK to Continue
44
Copy Master II User's Guide
Up or
Press the Enter button to enter the
Select Loading Drive menu.
Press the Up or
highlight the desired drive. Press the
Enter button to select the drive. The du-
plicator will return you to the main
menu.
Press the Enter button to enter the
Format Hard Drive menu.
Press the Enter button to initiate the
drive. After the drive has been format-
ted, the duplicator will return you to the
main menu.
Down buttons to
Down buttons to
Up or
Octave Systems Inc