Octave Copy Master II User Manual page 22

Copy Master II
8. Select Source
Reader Port 1
DVD-VPD-MP1
Writer Port 2
_NEC DVD_RW ND-3540
Make sure the Master Reading Source is set to the "Reader Port." If not, press
the Up or
with a Reader port, then choose the device with the Writer Port number as
your Master Reading Source. Press the
tion.
Go back to the 1. Copy Menu. Use the
to the following screen:
Copy Master II
1. Copy
Duplication Mode:
Load and Copy
Once you have decided which mode you would like to run, press the
or Down buttons until the desired mode is displayed, and then press the
Enter button to confirm. You will see the Counter Selection Menu:
22
5.42
Down buttons to find it. If your duplicator is not equipped
5.42
Copy Master II User's Guide
Press the Enter button to enter the
Select Source Menu and you will see a
screen similar to one of the following:
The Reader Port can be indexed as ei-
ther Port 1 or 2. Either of these options
is acceptable.
Enter button to submit your selec-
Up or Down buttons to navigate
Start the Copy Process. Insert your mas-
ter disc and your blank discs into the
corresponding tray(s) and press the
Enter button to enter the 1. Copy menu.
You will see the Duplication Mode
menu:
You will be given two choices:
Load and Copy
■
On the Fly
■
For information on these modes, see
"Introduction to Duplication Modes" on
page 14.
Up
Octave Systems Inc