Auto Start - Octave Copy Master II User Manual

Setup

12.2 Auto Start

This setting allows you to choose Auto, Full, or Off.
Full: The duplicator automatically starts the copy process as soon as it
■
detects that the master disc and any or all of the writer trays of the du-
plicator are filled with recordable media.
Off: The duplicator requires you to press the
■
the duplication.
Auto: When your duplicator detects three blank discs on a four target
■
or higher duplicator (for example), and does not detect any additional
blank discs for 30 seconds, then the copy process is started automatical-
ly. However, in order for this feature to take effect, you need to be in-
side an operation menu such as Copy, Test, Test+Copy, and
Copy+Compare.
Setup
2. Auto Start
Auto Start:
Auto
Auto Start:
Full
Auto Start:
Off
Octave Systems Inc.
Use the Up or
lect the Auto Start menu and press the
Enter button to enter that menu.
Use the Up or
lect the autostart option and press the
Enter button to select that option.
Enter button to start
Down buttons to se-
Down buttons to se-
49