Octave Copy Master II User Manual page 36

Reader Port 1
DVD-VPD-MP1
The Copy Master II typically comes equipped with three ports:
Hard Drive Port 0: This is the Hard Disk Drive installed in the Copy
■
Master II.
Reader Port 1: This is a CD/DVD Reader only. It is typically the top-
■
most drive in the system.
Writer Port 2: This is one of the CD/DVD Read/Write drives. It is typ-
■
ically the drive immediately below the CD/DVD reader.
Some Copy Master II duplicators are not equipped with a Hard Disk Drive. If
your duplicator is not equipped with a HDD, then choose the device with the
Reader Port number or the Writer Port number as your Master Reading
Source.
Some Copy Master II duplicators are not equipped with a CD/DVD Reader.
If your duplicator is not equipped with a Reader, then choose the device with
the Writer Port number as your Master Reading Source. Press the
button to submit your selection.
Reader Port 1
Selected
36
Copy Master II User's Guide
The Copy Master II duplicator will
show a confirmation screen for two sec-
onds and return you to the main menu.
Enter
Octave Systems Inc