Octave Copy Master II User Manual page 12

3. System Info
■
Use this utility to see information about your duplicator. This informa-
tion includes the firmware version, CPU type, and RAM capacity. You
can check the specifications by pressing the
tons.
4. Device Info
■
Use this utility to see information about the CD/DVD drives in your du-
plicator. This information includes the manufacturer, model number,
etc.
5. Load Default
■
Use this utility to reset all of the options back to the manufacturer's de-
fault values. You can use this function if your duplicator is acting ab-
normally.
6. Update Firmware
■
Use this utility to update the software in your duplicator. To update, in-
sert the manufacturer's Certified Update CD into the Reader and press
the Enter button.
Important: You should not upgrade your duplicator's firmware unless
your duplicator is becoming unstable or you are advised to so by Tech
Support.
14. Manage Accounts
Use this menu option to:
Create user accounts and passwords to prevent unauthorized use of the
■
duplicator.
Edit existing user account information, including name and password.
■
Delete existing user account(s).
■
Enable/Disable this feature.
■
For additional information, refer to "Introduction to Account Management"
on page 13.
15. Shutdown
Use this menu option to turn off your duplicator. Once you see "Ready to
Power Off" message, then you can safely turn off the machine using the pow-
er switch.
Turning off your duplicator without performing this function increases the
risk of damaging your duplicator.
12
Copy Master II User's Guide
Up and
Octave Systems Inc
Down but-
page 63
page 67