Select Partition; Load Partition - Octave Copy Master II User Manual

Hard Drive Setup

10.1 Select Partition

The Select Partition submenu is used to select the partition on the Hard Disk
Drive that will be used as the Master Reading Source.
Hard Drive Setup
1.Select Partition
Choose Partition
1->[RESERVED]CD
Choose Partition
2->[FUN

10.2 Load Partition

The Load Partition menu is used to load a master disc into a partition on the
Hard Disk Drive. For information on partition size, see "Partition Size" on
page 43.
Hard Drive Setup
2.Load Partition
Load Partition[2/16]
Load ->New Partition
If you would like to load the master disc into a new partition, press the
ter button when the New Partition option is shown.
Choose Partition
2->[FUN
Depending on whether you are loading the master into a new partition, or into
an existing partition, you will see one of these two screens:
Octave Systems Inc.
Press the
Select Partition menu.
Use the
lect the desired partition. The RE-
SERVED partition is reserved for use by
the Duplicator when making Disc-to-
Disc copies.
Press the
partition named FUN.
]CD
Press the
Load Partition menu.
Use the
lect one of the existing partitions, press
the
Press the
partition named FUN.
]CD
Enter button to enter the
Up or Down buttons to se-
Enter button to select the
Enter button to enter the
Up or Down buttons to se-
Enter button to select it.
Enter button to select the
En-
39