Octave Copy Master II User Manual page 27

Copy
Preparing...
7 Disc Detected, Go?
Note: By default, the "Auto Start" setting is set to "Auto". For
example, if your duplicator has detected three blank discs and
didn't detect any additional blank discs within 30 seconds, then
the duplication starts automatically.
Once the number of blank discs you inserted matches the number of discs de-
tected on the screen, press the
Auto Start or wish to speed up the process). The Processing screen will ap-
pear.
Processing...
Please Wait
After two or three seconds of processing time, one of the following
Copy Progress screens will appear.
Counter Specified
Copying . . .4012MB
0/21
"4012MB" indicates the ca-
■
pacity of the master disc.
"12%" indicates the current
■
progress of the duplication.
"0/21" indicates you have a
■
project size of 21 copies and
you have made 0 copies so
far.
Note: It is normal to see the progress indicator stay at 10% and
100% for approximately 30 seconds for CD duplication and up to
one minute for DVD duplication. That is caused by the initializ-
ing and finalizing stages.
Octave Systems Inc.
The "7" indicates that the duplicator
recognized seven discs in the writer
trays. The actual quantity may be differ-
ent on your machine.
Enter button to confirm (if you are not using
Note: If the number of blank discs you
inserted doesn't match the number of
discs detected on the screen, wait 10-15
seconds for the duplicator to recognize
all of your blank discs.
or:
12%
No Counter Specified
Copying . . .4012MB
0
"4012MB" indicates the ca-
■
pacity of the master disc.
"12%" indicates the current
■
progress of the duplication.
"0"indicates that you have
■
made 0 copies so far.
12%
27