Octave Copy Master II User Manual page 55

Setup
Allow 5-10 seconds for the duplicator to detect your master disc and blank
discs. Once your discs have been recognized, you will see the following
screen:
AUTOCOPY
1 Disc Detected, Go?
After several seconds of processing time, the following Copy Progress Screen
will appear.
Copying
0
It is normal to see the progress indicator stays at 0-10% and 100% for approx-
imately 30 seconds for CD duplication and up to one minute for DVD dupli-
cation. That is caused by the initializing and finalizing stage.
Once the duplication run is completed, the successful copies will be ejected
and you shall see the following screen:
PASS 7 FAIL 0 (
Waiting for Blanks
Refill your blank discs to continue making more copies. If you wish to copy
a new master disc, you will have to remove the old master and load the new
master disc prior to loading any new blank discs into the writer trays.
Note: If you have a failed disc (bad copy), the failed disc will not
be ejected automatically. You need to manually eject the disc and
discard it if it's a write once recordable disc.
Octave Systems Inc.
Press the
wait for the duplicator to autostart.
21MB
Press the
wait for the duplicator to Auto Start.
60%
14)
The "PASS 7" indicates that the dupli-
cator copied the master to the seven
discs in the writer trays. The "FAIL 0"
indicates that none of the discs failed to
be copied. The ( 14) indicates the total
number of discs that have been copied
so far.
Enter button to continue or
Enter button to continue or
55