Octave Copy Master II User Manual page 28

Once the duplication run is completed, the successful copies will be ejected
and you will see the following screen:
PASS 7 FAIL 0(
Waiting for Blanks
Next, refill more blank media to continue making more copies, or you can
press ESC to terminate your project and go back to the Main Menu. If
you've specified a counter value for your project and your project is complet-
ed, you will see the following screen:
121 Disc Copied
Press OK to Finish
Note: If you enabled the counter and the number of discs you
have inserted is more than the number of discs you requested, you
will receive a message regarding you have inserted more discs
than you need. You can continue to copy or eject the extras.
Note: If you have any failed discs (bad copy), the failed disc(s)
will not be ejected automatically. You need to manually eject them
and throw them away if they are write once recordable disc(s).
28
7)
"PASS 7" indicates that you've just
■
made 7 successful copies.
"FAIL 0" indicates that you have no
■
failures in this run.
( 7) indicates that you have success-
■
fully copied 7 copies so far.
If you see this message, you can press
the
Menu.
Copy Master II User's Guide
Enter button to go back to Main
Octave Systems Inc