2. Auto Start
■
Use this setting to set Auto Start to Full, Auto, or Off.
Full sets the duplicator to automatically copy once your master disc and
all of the writer trays of the duplicator are filled with recordable media.
Auto starts the duplication process automatically when your duplicator
has detected that blank discs have been inserted, and does not detect
any additional blank discs for 30 seconds.
Off requires you to press the
In order for this feature to take effect, you need to be inside one of the
operation menus: Copy, Test, Test & Copy, or Copy & Compare.
3. Read Error Skip
■
Normally, when the duplicator encounters a read error while reading
the master disc, all the duplication will be aborted and all the recordable
media will be ruined. However, if you believe that your master disc has
a small, insignificant error due to physical damage, you can enable this
setting to allow the duplicator to skip any read errors that it encounters.
Important: This function does not fix the error; it only skips it to make
the rest of the data readable.
4. CD Writing Mode
■
Use this setting to select the mode you would like use to duplicate a CD.
There are two different modes: "Disc at Once" and "Track at Once."
Unless you understand completely what they mean, we strongly sug-
gest you to set it as "Disc at Once".
5. Max Audio & VCD Speed
■
Audio CD's and Video CD's do not have internal error checking capa-
bility, so duplicating them at too high a speed can cause frequent errors.
Use this setting to adjust the maximum duplication speed for Audio and
Video CDs.
6. Buzzer
■
Use this setting to choose whether you want to hear a beep when you
press a button and when a task has been completed.
7. Startup Menu
■
Use this setting to choose which menu you would like to see first when
you turn on the duplicator.
8. Screen Saver
■
Use this setting to enable or disable the Screen Saver. When this is en-
abled, a screen saver is displayed whenever your duplicator has been
idle for a long period of time.
10
Copy Master II User's Guide
Enter button to begin the duplication.
Octave Systems Inc
Need help?
Do you have a question about the Copy Master II and is the answer not in the manual?