Read Error Skip; Cd Writing Mode - Octave Copy Master II User Manual

12.3 Read Error Skip

Normally, when the duplicator encounters a read error while reading your
master disc, the duplication is aborted and all the recordable media are ruined.
However, if you believe that your master disc has a small, insignificant error
due to physical damage, you can enable this setting to allow the duplicator to
skip any read errors it encounter.
Note: This function does not fix the error; it only skips it to make
the rest of the data readable.
Setup
3.Read Error Skip
Read Error Skip
On
Read Error Skip
Off

12.4 CD Writing Mode

This setting allows you to select which mode to use to duplicate a CD; "Disc
at Once" or "Track at Once." Unless you understand completely what these
modes are, we strongly suggest you to set it to "Disc at Once."
Setup
4. CD Writing Mode
CD Writing Mode
Disc at Once
CD Writing Mode
Track at Once
50
Copy Master II User's Guide
Use the Up or
lect the Read Error Skip menu and press
the Enter button to enter that menu.
Use the Up or
lect whether Read Error Skip is on or
off, and press the
lect that option.
Use the Up or
lect the CD Writing Mode menu and
press the Enter button to enter that
menu.
Use the Up or
lect either Disc at Once or Track at
Once, and press the
select that option.
Down buttons to se-
Down buttons to se-
Enter button to se-
Down buttons to se-
Down buttons to se-
Enter button to
Octave Systems Inc