Test+Copy; Copy+Compare; Verify - Octave Copy Master II User Manual

Test+Copy

4. Test+Copy
With the Test + Copy menu option, the Copy Master II simulates the copying
process, and then makes copies if everything works correctly. If an error is en-
countered during the simulation, the Copy Master II displays an error mes-
sage, and the copy process is not initiated.
Operation in Test+Copy mode is identical to operation in Copy mode. See
"Copy" on page 21 for instructions.

5. Copy+Compare

The Copy + Compare menu option is used to make verified copies. After the
copy process is done, the Copy Master II automatically compares the copies
to the Master Reading Source to ensure that they are identical. When the op-
eration is complete, the Copy Master II automatically ejects the good discs
only. You must manually eject the bad discs and discard or erase them as
needed.
Note: The Compare and Copy+Compare functions only work
with data discs, and do not work with audio/video discs.
Operation in Copy+Compare mode is identical to operation in Copy mode.
See "Copy" on page 21 for instructions.

6. Verify

The Verify menu option performs a Disc Readability Check. This checks the
readability of both your master and copies (not blank discs) to ensure that they
are all readable.
First, ensure that the Master Reading Source is set to the appropriate source
(see "Select Source" on page 35).
Use the UP or DOWN arrow buttons to navigate back to the 6. Verify Menu:
Copy Master II

6. Verify

Counter:
No Counter
Octave Systems Inc.
5.42
Press the
Verify option.
Follow the instructions shown in "Set-
ting Counters" on page 17 to continue.
Once the counters have been set, press
the Enter button to confirm.
Enter button to enter the
31