Test; Compare - Octave Copy Master II User Manual

Test

2. Test
Use the Test menu or the Test quick key to simulate the copy
process. With simulation, write once recordable discs such as
DVD-R, or CDR will be reusable. The purpose of simulation is to ensure error
free duplication.
Note: Due to physical limitations of the DVD+R recordable for-
mat, if you try to simulate DVD+R copying, you will encounter
failure messages.
Warning: If you are using CD/DVD ReWritable discs as your
blank media during the simulation, the content on those discs will
be permanently erased.
Operation in Test mode is identical to operation in Copy mode. See "Copy"
on page 21 for instructions.

3. Compare

Use the Compare function to perform a bit-by-bit comparison between the
Master Reading Source and all of the disc copies in the Writer Trays. This en-
sures that all of your copies are identical to the Master Reading Source.
Note: The Compare and Copy+Compare functions only work
with data discs, and do not work with audio/video discs.
Before starting the Compare function, select the Master Reading Source us-
ing the Up or
Enter button to enter the menu.
Copy Master II
8. Select Source
Reader Port 1
DVD-VPD-MP1
Go back to the 2. Compare Menu. Press the
menu. You will see the Counter Selection Menu:
Octave Systems Inc.
Down buttons to find the 8. Select Source menu. Press the
5.42
Press the
Select Source Menu and you will see a
screen similar to the following:
Set the Master Reading Source to the
appropriate source. Press the
button to enter the selection. The dupli-
cator will flash a confirmation screen
and return you to the main menu.
Enter button to enter the
Enter button to enter the
Test
Enter
29