Octave Copy Master II User Manual page 26

Copy Master II
8. Select Source
Hard Drive Port 0
SAMSUNG AP1604N
Make sure the Master Reading Source is set to the Hard Drive Port. If not,
press the Up or
submit your selection.
After the Master Reading Source has been selected, the duplicator will return
you to the main menu. Use the
Copy menu:
Copy Master II
1. Copy
Choose Partition
3->[FUN
Counter:
No Counter
Preparing...
Waiting for Blanks
26
5.42
Down buttons to find it. Press the
Up or
5.42
]CD
Copy Master II User's Guide
Press the Enter button to enter the
Select Source Menu and you will see a
screen similar to the following:
The Hard Drive Port is always indexed
as Port 0.
Down buttons to navigate to the
Press the Enter button to enter the
1. Copy menu. The duplicator will ask
you to select the partition where the
master disc is stored:
Use the Up or
find the partition where your master disc
is stored. Press the
select that Partition. Next, you will see
the Counter Selection menu:
Follow the instructions shown in "Set-
ting Counters" on page 17 to continue.
Once the counters have been set, press
the Enter button to confirm. You will
see the Waiting for Blanks screen.
Allow 5-10 seconds for the duplicator to
detect your blank discs. After the discs
have been recognized, you will see a
screen similar to this:
Enter button to
Down buttons to
Enter button to
Octave Systems Inc