Table of Contents
Advertisement
Chapter 2
2.1
Using the EB DVR System for the First Time
Upon connecting the power, the unit automatically detects the status of the hard
disk. The hard disk must be formatted for the first time installed on DVR system. If
you are prompt to format the hard disk, press
hard disk and
2.1.1 Set up the System Date and Time
1. Press
to call up the OSD menu and then use
and
to go up and down and select SUBMENU. And then, press
to confirm the selection.
2. In Submenu, select the DATE and press
then, use
▲
and
3. To adjust Time, follow the above step 2 and 3.
4. Press
to go back to main menu after adjustment.
2.2
Surveillance Screen
User can switch to display each channel in full screen or 4 channels at the same
time in D1 or CIF record mode.
To know if the channel is being recorded, the " " record symbol would appear
beside the channel number. The
availability of audio. The information below the screen shows the current date and
time, recording mode (record schedule setting), hard disk drive (Master/Slave) and
the percentage of the used hard disk space.
Operating the EB DVR System
(menu) for NO to remain unchanged.
HARD DISKS INFORMATION
VERSION
1 . 5. 03
HDD CHECKING . . .
MASTER HDD
SIZE
76GB
HDD FORMAT YES (SELECT) / NO (MENU)
and
or
▼
buttons to move the selection to the left and right.
(microphone) and
(select) for YES to format the
509MB
▲
again to make a selection. And
and
to adjust the date and use
12
and
or
▼
(speaker) indicate the
or
Advertisement
Table of Contents
