Receive A Message With Request For Answer; Message Queuing And Message Priority - ASCOM d62 Talker User Manual

User Manual
Ascom d62 DECT Handset
7.3.9 Open a Sent Message
1 Enter "Messaging" menu, see
2 Select "Sent".
3 Select message.
4 Press "View" to read the message.
7.3.10 Send to Another Destination
1 Enter "Messaging" menu, see
2 Select "Inbox" or "Sent".
3 Select message.
4 Press "More".
5 Select "Forward".
6 Press "Send".
7 Enter the number.
8 Press "Send".
7.4

Receive a Message with Request for Answer

Note: This feature is applicable for d62 Messenger and d62 Protector only.
In the status bar, a message with request for answer is indicated the same way as an
ordinary message, see
In the message list, the message with request for answer is indicated by the
7.4.1 Accept/Reject the message
Press the soft key "Accept" or "Reject".
When an acknowledged message has been replied to, the icon
list. The text "Accepted" or "Rejected", and time and date is also added in the acknowledged
message.
Note: The option "Delete" is not available for a message with request for answer. An
unacknowledged message can only be deleted from the message list.
7.5

Message Queuing and Message Priority

Note: This feature is applicable for d62 Messenger and d62 Protector only.
To notify about new incoming messages, all incoming messages are placed in a message
queue. The sorting order for the message queue depends on the system settings. By default
the messages are sorted according to message priority, and thereafter according to arrival
time.
The messages in the message queue are automatically displayed for 20 seconds until all
messages have been displayed. You can extend the time to display a message by pressing
any button. You can also close a message to immediately see the next message in the
message queue.
15 June 2012 / Ver. G
4.4 Messaging
4.4 Messaging
7.3 Receive a Message on page 34.
on page 20.
on page 20.
is shown in the message
TD 92477EN
icon.
37