Keys And Buttons - ASCOM d62 Talker User Manual

User Manual
Ascom d62 DECT Handset
3.4

Keys and Buttons

3.4.1 Off-hook key
3.4.2 On-hook and On/Off Key
3.4.3 Navigation/Confirmation Key
3.4.4 Sound off Key
3.4.5 Mute and PTT Button
3.4.6 Key Lock, and Upper/Lower Case Key
3.4.7 Soft Keys
Soft keys
Figure 4. Soft Keys.
15 June 2012 / Ver. G
This key is used for connecting calls. One short press in standby mode opens
the call list.
This key is used for disconnecting calls and returning to main screen.
A long press in standby mode will switch the handset on/off.
Use this key to step in the menu and when working in text mode.
, , , and are used for stepping left/right and up/down in the menu.
The navigation key can be programmed, the
the Inbox, and is a short cut to Call contact. During a call it is possible to
increase/decrease the volume by pressing
A long press on the key in idle mode, changes between ring signal on/off,
At incomming call, a long press on the key silencing the ring signal. During a
call, a long press on the key changes between microphone on/off.
A long press on the Mute button in idle mode, changes between ring signal
on/off, at incoming call, a long press on the button silencing the ring signal.
During a call, a long press on the button changes between microphone on/
off.
During a PTT call, the microphone is silenced when the PTT button is
released.
This key is to lock the keypad in combination with the soft key "Lock". It is
also for switching between upper/lower case and digits.
Call
is by default a short cut to
and .
List
TD 92477EN
15