ASCOM d62 Talker User Manual page 62

User Manual
Ascom d62 DECT Handset
Forward Message
1 Select "More".
2 Select "Forward".
3 Enter additional text if needed.
4 Select "Send"
5 Enter number.
6 Select "Send" to forward the message.
Call Sender
1 Select "View".
2 Select "More".
3 Select "Call Sender".
Call number in text
1 Select "View".
2 Do one of the following:
• Press "More" and select "Call no. in text"
• Press
3 If the message contains several numbers, select the number to be called from the list.
4 Press "Call", or
Save Number
1 Select "View".
2 Select "More".
3 Select "Save number".
4 Select "Work Number"/"Mobile number"/"Other number".
5 Press "Add".
6 Enter name for the contact.
7 Press "OK".
8 Press "Save". The number will be saved in the contact list.
9.5.2 Write New Messages
1 Select "Write new message".
2 Enter text, and press "Send". See also
It is possible to save the message and send it later by pressing the soft key "Back"
and select "Yes". The message will be stored under Unsent messages. See
Unsent
3 Enter number, or press middle soft key to get number from contact list.
4 Press "Send".
9.5.3 Unsent Messages
1 Select "Unsent" to view the list.
1.Visible if the number consists of minimum 3 digits.
15 June 2012 / Ver. G
.
.
Messages.
1
.
7 Messaging on page 34.
TD 92477EN
9.5.3
58