ASCOM d62 Talker User Manual page 51

User Manual
Ascom d62 DECT Handset
11 An information text "Protection on?" is displayed. Select "Yes" if the new system is to
be protected. It is not possible to delete a protected subscription from the System
meny
12 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "System".
4 Select "Unsubscribe"
5 Select the system to unsubscribe.
6 Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1 Select "Rename System".
2 Select system to rename.
3 Enter new name.
4 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see
page 46.
1 Select "Priority".
2 Change the priority if needed by selecting "Up" or "Down". The priority will be saved
when "Back" is selected.
9.1.4 In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger
during a call.
1 Select "In charger".
2 Select "Call behavior".
3 Select one of the following:
• No action - no action will be performed when handset is placed in charger during a
call.
• Loudspeaking - The loudspeaker will be activated when handset is placed in
charger during a call.
• End call - The call will be disconnected when handset is placed in charger.
1.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.
15 June 2012 / Ver. G
1
.
in the menu.
1
.
TD 92477EN
Change System on
47