Advanced Configuration
Interfaces
NOTE: When enabling Auto Switch Mode, Proxim recommends that you also enable Auto Channel Select. ACS is is
configured on the Wireless A or Wireless B page. See
(802.11b/g Radio)
•
Current Mesh Mode: Displays the current Mesh mode of the AP (Mesh Portal or Mesh AP).
•
Disable Client Access on No Uplink Connection: When this option is enabled, the AP will not provide wireless
connections to clients on both radios if the unit does not have an uplink connection.
•
Notify Clients on Uplink Change: When this option is enabled, the AP will send a deauthentication message to
currently connected clients when its uplink changes. This allows clients to restart a fresh connection, renewing their IP
addresses if necessary.
For more information on Mesh, see
for more information.
Mesh
Networking.
AP-4000/4000M/4900M User Guide
Wireless-A (802.11a/4.9 GHz Radio) and Wireless-B
70