Proxim ORiNOCO AP-4900M User Manual page 68

Advanced Configuration
Interfaces
• Mesh Radio: Select the wireless interface on which to enable Mesh functionality. Select Wireless Interlace A
(802.11a/4.9 GHz radio) or Wireless Interface B (802.11b/g radio).
• Mesh SSID: Enter a unique Mesh Network Name (SSID) between 1 and 16 characters.
NOTE: Do not use quotation marks (single or double) in the Network Name; this will cause the AP to misinterpret the
name.
• Security Mode: Select None to use Mesh networking without security, or AES to enable AES encryption between
Mesh links.
• Shared Secret: Enter a password between 6 and 32 characters. This is the password shared between a Mesh AP
and the Portal to which it is connected when AES is selected as the security mode.
• Mesh Mobility: Set this parameter to Fixed if the AP is statically placed, or to Mobile if the AP is mobile.
• QoS Policy Index: The index number of the QoS policy to be used by the Mesh radio. For more information on QoS,
see QoS.
• Disable Client Access on Mesh Radio: When this option is enabled, the AP will not accept clients on its Mesh radio.
When disabled, clients can link to the Mesh radio.
Advanced Mesh Parameters
Figure 4-19 Advanced Mesh Parameters
AP-4000/4000M/4900M User Guide
68