Storm Threshold - Proxim ORiNOCO AP-4900M User Manual
Hide thumbs
Also See for ORiNOCO AP-4900M:
- User manual (271 pages) ,
- Specifications (3 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Advanced Configuration
Bridge
Figure 4-39 Spanning Tree Sub-Tab
Storm Threshold
Storm Threshold is an advanced Bridge setup option that you can use to protect the network against data overload by:
•
Specifying a maximum number of frames per second as received from a single network device (identified by its MAC
address).
•
Specifying an absolute maximum number of messages per interface.
The Storm Threshold parameters allow you to specify a set of thresholds for each interface of the AP, identifying separate
values for the number of broadcast messages/second and Multicast messages/second.
When the number of frames for an interface or from a single network device exceeds the maximum value per second, the
AP will ignore all subsequent messages in that second received on that interface or from that network device.
•
Address Threshold: Enter the maximum allowed number of packets per second.
•
Ethernet Threshold: Enter the maximum allowed number of packets per second.
AP-4000/4000M/4900M User Guide
105
Advertisement
Table of Contents
