Using Tables And Strings; Working With Tables; Using Strings - Proxim ORiNOCO AP-4900M User Manual

Command Line Interface (CLI)

Using Tables and Strings

Using Tables and Strings

Working with Tables

Each table element (or parameter) must be specified, as in the example below.
[Device-Name]>set mgmtipaccesstbl 0 ipaddr 10.0.0.10 ipmask 255.255.0.0
Below are the rules for creating, modifying, enabling/disabling, and deleting table entries.
• Creation
– The table name is required.
– The table index is required – for table entry/instance creation the index is always zero (0).
– The order in which the table arguments or objects are entered in not important.
– Parameters that are not required can be omitted, in which case they will be assigned the default value.
• Modification
– The table name is required.
– The table index is required – to modify the table, "index" must be the index of the entry to be modified.
– Only the table objects that are to be modified need to be specified. Not all the table objects are required.
– If multiple table objects are to be modified the order in which they are entered is not important.
– If the entire table entry is to be modified, all the table objects have to be specified.
• Enabling/Disabling
– The table name is required.
– The table index is required – for table enabling/disabling the index should be the index of the entry to be
enabled/disabled.
– The entry's new state (either "enable" or "disable") is required.
• Deletion
– The table name is required.
– The table index is required – for table deletion the index should be the index of the entry to be deleted.
– The word "delete" is required.

Using Strings

Since there are several string objects supported by the AP, a string delimiter is required for the strings to be interpreted
correctly by the command line parser. For this CLI implementation, the single quote or double quote character can be
used at the beginning and at the end of the string.
For example:
[Device-Name]> set sysloc Lobby - Does not need quote marks
[Device-Name]> set sysloc "Front Lobby" - Requires quote marks.
The scenarios supported by this CLI are:
"My Desk in the office"
'My Desk in the office'
"My 'Desk' in the office"
'My "Desk" in the office'
"Daniel's Desk in the office"
'Daniel"s Desk in the office'
Double Quotes
Single Quotes
Single Quotes within Double Quotes
Double Quotes within Single Quotes
One Single Quote within Double Quotes
One Double Quote within Single Quotes
AP-4000/4000M/4900M User Guide
184