Proxim ORiNOCO AP-4900M User Manual page 195

Command Line Interface (CLI)
Other Network Settings
Set the Distance Between APs
[Device-Name]>set wif <index> distaps <1–5> (see below)
[Device-Name]>reboot 0
Value Distance Between APs
1 Large
2 Medium
3 Small
4 Mini
5 Micro
Set Ethernet Speed and Transmission Mode
[Device-Name]>set etherspeed <value> (see below)
[Device-Name]>reboot 0
Ethernet Speed and
Transmission Mode
10 Mbits/sec - half duplex
10 Mbits/sec - full duplex
10 Mbits/sec - auto duplex
100 Mbits/sec - half duplex
100 Mbits/sec - full duplex
Auto Speed - half duplex
Auto Speed - auto duplex
Set Interface Management Services
Edit Management IP Access Table
[Device-Name]>set mgmtipaccesstbl <index> ipaddr <IP address> ipmask <subnet mask>
Configure Management Ports
[Device-Name]>set snmpifbitmask <(see below)>
[Device-Name]>set httpifbitmask <(see below)>
[Device-Name]>set telifbitmask <(see below)>
Choose from the following values:
Interface Bitmask
0 or 2 = Disable (all interfaces) All management channels disabled
1 or 3 = Ethernet only
4 or 6 = Wireless A only
Value
10halfduplex
10fullduplex
10autoduplex
100halfduplex
100fullduplex
autohalfduplex
autoautoduplex (default)
Description
Ethernet only enabled
Wireless A only enabled
AP-4000/4000M/4900M User Guide
195