Using The Menu Options; Figure 5-3. System Meters Screen (Typical For Powerware 9315 500 480/480V Unit) - Eaton Powerware 9315 Operation Manual

5.6 Using the Menu Options

The UPS menus allow you to display data in the information area to help you monitor and
control UPS operation. The following menus and options are available:
A
A
A
A
A
Figure 5-3 shows the LCD screen as it appears when you first start the UPS. The Meters
menu is displayed in the menu box, with the System option highlighted. In the information
area, the system meters show their current readings.
System Normal
Alarm:
Notice: None
Meters

Figure 5-3. System Meters Screen (Typical for Powerware 9315 500 480/480V Unit)

The Input area shows the phase-to-phase voltage, frequency, and phase current of the
incoming utility, followed by the kVA, KW, and power factor measurements. The output
area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area
displays the DC voltage (V) and the DC current (I).
9315 UPS (300–500 kVA) Operation Manual S 164201119 Rev F www.powerware.com
EATON Powerware
®
Meters − Displays UPS performance meters for the system or critical load.
Events − Displays the list of Active System Events and a historical log of system events.
Statistics − Displays statistical information about UPS operations for the battery, load, or
line.
Graphics − Displays a real-time graphic representation of the flow of current through
the internal UPS components.
Setup − Allows you to configure the UPS communication port and set the date and time
for the timestamp.
None
Battery
Percent
100%
VAB
482
Meters
System
Load Amps
Events Statistics Graphics Setup
Uninterruptible Power System
Input
VBC VCA FREQ
484 481 60.0
IA IB IC
515 512 520
KVA KW PF
433 416 0.96
Bypass
VAB VBC VCA
482 484 481
Using the Monitor Panel
04 NOV 1997 14:23:45
Output
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC IN
475 473 476 000
KVA KW PF
394 392 0.99
Battery
V I
540 000
5−5