Answering A Call - Escene ES410 User Manual

All manuals and user guides at all-guides.com
--2) Enter a number;
Another call is active
--3) Press '#' button (default) ;
-or press
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and
then go off-hook by lifting the handset or pressing
button.
• If you make a mistake while dialing, press C button to erase digits.

Answering a call

You can answer a call by simply lifting the handset，or you can use other options if they aer
available on SayHi ES410:
If you want
to...
--1) Your phone ring;
Answer with a
--2) Line button of the
handset
ringing line is Red
and flashing, Light strip is
Answer with the
Red
speakerphone
(Non-headset
mode)
Answer with the
a headset
Switch from a --1) Another Line button is Red
connected Call to Red
answer a ringing --2) Press the flashing
call the original call will be hold.)
Auto-answer --1) Press MENU or OK button > "Function setting" > "Auto
Escene Communication
to send the number.
Then...
--Pick up the handset
--Press Speaker button
and flashing;
-or press the Line button flashing
Red
-or press
--Put on headset, press Headset
button so that the status light is
Red
speakerphone
and flashing;
Line button to answer (at this time,
ES410 IP-Phone
, Headset or Speaker
,
, and then do as using
and flashing, Light strip is
www.escene.ru