Answering A Call - Escene ES320 User Manual

Dial from a call log
Place a call while
Another call is active
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and
then go off-hook by lifting the handset or pressing
• If you make a mistake while dialing, press C button to erase digits.

Answering a Call

You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi ES320.
If you want
to...
--1) Your phone ring;
Answer with a
--2) Line button of the
handset
Answer with the
speakerphone
(Non-headset
mode)
Answer with the
a headset
Escene Communication
--1) Press MENU or OK button
"Missed calls", "Received calls" and "Dialed numbers",
- or press Navigation button (in Standby interface) > select
"Missed calls" (down), "Received calls" (left) and "Dialed
numbers" (right) )；
--2) Then press OK button or
--1) Press Hold button or
--2) Enter a number;
--3) Press '#' button (default) ;
-or press
ringing line is Red
flashing, Light strip is
Red and flashing；
"Call history", you can select
>
.
;
to send the number.
, Headset or Speaker button.
Then...
--Pick up the handset
and
--Press Speaker button
-or press the flashing
button,
-or press
--Put on headset, press Headset
button so that the status light is
Red , and then do as using
speakerphone
15
Line
15
www.escene.ru