Computer Setup-Advanced - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING!
Table 2-14
Option
CPU Type
CPU Speed
Cache RAM (L2)
Cache RAM (L3)
Primary Video
Adapter
SATA1 Controller
SATA1 Controller
Mode
USB Ports
Onboard LAN
Onboard LAN Boot
ROM
Supervisor
Password
User Password
Change Supervisor
Password
Change User
Password
Onboard Audio
20 Chapter 2 Computer Setup (F10) Utility
Setting items on this menu to incorrect values may cause your system to malfunction.
Computer Setup—Advanced
Description
(view only)
(view only)
(view only)
(view only)
Allows you to select the boot display device when more than 2 video options are offered by the
system:
Onboard
●
● PCI-E
Allows you to disable/enable the SATA controller.
If SATA Controller is enabled, allows you to set the mode to:
IDE
●
AHCI
●
Allows you to disable/enable individual USB ports.
Allows you to disable/enable onboard LAN controller.
Disables/enables the boot ROM of the onboard LAN chip.
Allows you to view whether the supervisor password is enabled or disabled.
Allows you to view whether the user password is enabled or disabled.
NOTE: Only displays if a Supervisor password is set.
Allows you to establish, disable, or change the supervisor password.
Allows you to establish, disable, or change the user password.
NOTE:
Only displays if a Supervisor password is set.
Allows you to set the onboard audio to:
Disabled
●
● Enabled
Auto
●