Using Computer Setup (F10) Utilities - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press
to enter Computer Setup. Press
NOTE:
press F10
3. The Computer Setup Utility screen is divided into menu headings and actions.
Six menu headings appear on the Computer Setup Utility screen:
Main
●
Advanced
●
Boot
●
Power
●
PC Health
●
Exit
●
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
4. To apply and save changes, press the
If you have made changes that you do not want applied, press the
values.
To load optimized default values, press the
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after
exiting the F10 Setup screen.
Table 2-1 Computer Setup (F10) Utility Main Menu
Heading
Main
Advanced
Boot
Power
PC Health
Exit
Enter
If you do not press F10
before the unit boots to the operating system to access the utility.
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
F10 before the system boots to the operating system
to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and again
F10 key.
F7 key.
Table
Computer Setup—Main on page 6
Computer Setup—Advanced on page 7
Computer Setup—Boot on page 8
Computer Setup—Power on page 9
Computer Setup—PC Health on page 10
Computer Setup—Exit on page 10
HP Pro 2110 – Computer Setup (F10) Utilities
F5 key to return to the previous
5