HP Pro 2110 Small Form Factor Maintenance & Service Manual page 134

Hide thumbs Also See for Pro 2110 Small Form Factor:
Table of Contents

Advertisement

9.
Carefully lift the processor from the socket (3).
CAUTION:
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
CAUTION:
damage to the processor's solder connections.
NOTE:
to remove Intel processors.
10.
Rotate the locking lever to its full open position (1).
124
Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Do NOT handle the pins in the processor socket. These pins are very fragile and
The heat sink must be installed within 24 hours of installing the processor to prevent
Steps 10 – 11 are for computers with AMD processors. See steps 7 – 9 for instructions

Advertisement

Table of Contents
loading

Table of Contents