HP Pro 2110 Small Form Factor Maintenance & Service Manual page 60

Table 5-2
Item
1
2
3
4
NOTE:
A DIMM must occupy the XMM3 socket.
DIMM Socket Locations – HP Pro 3130
When installing memory modules:
If installing only one memory module, install it in DIMM2.
●
If installing 2 memory modules:
●
2 matching memory modules - install in DIMM2 and DIMM4.
◦
2 non-matching memory modules - install in DIMM2 and DIMM4. Install the larger (GB)
◦
module in DIMM2 and smaller (MB) module in DIMM4.
If installing 3 memory modules:
●
3 matching memory modules - install in DIMM2, DIMM4, and DIMM1.
◦
2 matching memory modules and 1 non-matching memory module of smaller size (MB) than
◦
combined matching modules (example: 2x2GB and 1x1GB) - install the matching pair in
DIMM2 and DIMM4 and smaller (MB) module in DIMM1.
If installing 4 memory modules:
●
4 matching memory modules - install in DIMM2, DIMM4, DIMM1, and DIMM3.
◦
3 matching memory modules and 1 non-matching memory module of smaller size (MB) than
◦
combined matching modules (example: 3x2GB & 1x1GB) -install the matching pair in
DIMM2, DIMM4, and DIMM1 and smaller (MB) module in DIMM3.
50 Chapter 5 Removal and Replacement Procedures Minitower (MT) Chassis
DIMM Socket Locations – HP Pro 3125
Description
XMM1 socket, Channel B
XMM2 socket, Channel B
XMM3 socket, Channel A
(populate first)
XMM4 socket, Channel A
Socket Color Insertion Order
Blue
Blue
Black
Black
3
4
1
2