Computer Setup-Advanced - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Table 2-2 Computer Setup—Main (continued)
Option
SATA Controller
Onboard FDC
Controller
Drive A
Halt On
POST Delay
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-3 Computer Setup—Advanced
Option
Execute Disable Bit
Intel (R)
Virtualization Tech
Init Display First
Description
Allows you to choose how the SATA controller and devices are accessed by the operating system.
The following options are available:
● Native Mode - 4 SATA port
Compatible Mode - 2 PATA devices and 2 SATA devices (ports)
●
Disables/enables the floppy disk controller.
(view only)
Allows you to set POST error behavior to:
No Errors
●
● All Errors
All But Keyboard
●
Allows you to set a POST delay to:
0 seconds
●
5 seconds
●
10 seconds
●
15 seconds
●
● 30 seconds
Description
Disables/enables hardware DEP function.
Allows you to enable/disable the processor's Virtualization Technology feature.
Allows you to select the primary display device:
● OnChip VGA
PCI Slot
●
PCIEx
●
HP Pro 2110 – Computer Setup (F10) Utilities 7