Populating Dimm Sockets - HP Pro 2110 Small Form Factor Maintenance & Service Manual

Populating DIMM Sockets

There are four DIMM sockets on the system board, with two sockets per channel.
DIMM Socket Locations – HP Pro 3120
When installing memory modules:
If installing only one memory module, install it in DIMM1.
●
If installing 2 memory modules:
●
2 matching memory modules - install in DIMM1 and DIMM3.
◦
2 non-matching memory modules - install in DIMM1 and DIMM3. Install the larger (GB)
◦
module in DIMM1 and smaller (MB) module in DIMM3.
Memory 47