Computer Setup Advanced - HP Z Series Maintenance And Service Manual
Hide thumbs
Also See for Z Series:
- User manual (40 pages) ,
- Installation manual (14 pages) ,
- Faq (1 page)
Table of Contents
Advertisement
Computer Setup Advanced
This table provides information about the Computer Setup Advanced menu.
NOTE:
Support for specific Computer Setup options can vary, depending on the hardware
configuration.
Table 6-3
Computer Setup Advanced (for advanced users)
Option
Display Language
Scheduled Power-On
Boot Options
66
Chapter 6 Computer Setup (F10) Utility
Heading
Lets you select the language of the menus in F10 Setup and the keyboard layout.
This feature wakes the system when it is off at a specified date and time.
Select the devices that the computer can boot from, as well as other options, including:
●
Startup Delay (sec): Enabling this feature adds a user-specified delay to the POST process.
One purpose for the delay is to provide additional time to activate hotkeys such as
Startup Menu or
f10
for Computer Setup.
●
Fast Boot: Default is enabled.
●
CD-ROM Boot (select products only): Default is enabled.
●
USB Storage Boot: Default is enabled.
●
Network (PXE) Boot: Default is enabled.
●
After Power Loss: Default is Power Off.
■
Power off: Causes the computer to remain off when power is restored.
■
Power on: Causes the computer to turn on automatically as soon as power is restored.
■
Previous state: Causes the computer to turn on automatically as soon as power is
restored, if it was on when power was lost.
NOTE:
If the system is configured to Power On from Keyboard Ports (see Power Management
Options), then this setting is forced to Power On.
●
Prompt on Memory Size Change: Default is enabled.
●
Prompt on Fixed Storage Change: Default is disabled.
●
After Boot Device Not Found: Default is Stop.
■
Stop: Show boot failed message only if no boot devices are found.
■
UEFI Diagnostics: Start the HP UEFI Diagnostics Tool to check if device issues found.
■
Restart: Restart the computer to if boot device is not found.
●
Audio Alerts During Boot: Default is enabled. When disabled, most audible beeps from errors,
warnings, and password prompts during boot up are suppressed.
●
Numlock on at boot: Default is disabled.
esc
for the
Advertisement
Table of Contents
