Setting The Dial Tone Detection - Muratec MFX-2550 User Manual

Setting the
„
Select if you set the dial tone detection. Select [OFF] normally.
1
Press <Setting>.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
4
Press [Dial
5
Select [ON]
If you select [ON], you cannot transmit the faxes through a line that cannot acquire a dial
tone.
3-10 Initial Setup (User Install)
Dial Tone Detection
Tone Detect].
or [OFF] to detect or not detect the dial tone, and press [Enter].