Registering Destinations; Registering / Editing Address Book Destinations - Muratec MFX-2550 User Manual

Registering Destinations

Registering / Editing Address Book Destinations

Destinations can be registered in the address book for easy use. Up to 2,000 frequently
used destinations can be registered. The following items can be registered for each
destination.
Item
Search Number
Name
Fax No.
e-mail
Super G3
PIN
Note
• Either a fax number or e-mail address must be registered.
• Address book destinations can also be registered from OfficeBridge. When
registering a destination from OfficeBridge, you can also register the phone number
and address of the destination and specify rerouting settings. For details, refer to
Chapter 3, "Creating Address Books" in the OfficeBridge Guide.
• If you register an address book destination, two address book buttons are created in
the address book; a fax number button and e-mail address button.
• For details on setting the PIN mode, refer to Chapter 2, "Activating the PIN mask"
in the Administrator's Guide.
7-2

Registering Destinations

The number for the destination. When transmitting a fax or e-mail, enter
this number to select the destination. For details, refer to
Using Search Numbers".
Since any number between 1 and 9999 can be set, you can change the
number to one that is easy to remember.
The name for the destination. When attaching a cover page, the name
registered here is entered in the Destination field on the cover page. Up
to 24 characters can be entered.
The fax number of the destination. Pause and other dialing options can
be entered in addition to numerals, *, and #.
the prefix number if you want to use a prefix. Up to 40 digits can be
entered.
The e-mail address of the destination. Up to 50 characters can be entered.
Set whether to perform transmission with Super G3.
If "Mode 1" is set for the PIN mode, register a PIN.
Description
(See page 5-13.)
(See page 3-27.)
"Specifying
Also register