7
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
Note
•
After scanning the document, you can check or delete the reserved transmission by
pressing <Job Confirm. Fax Cancel>.
•
To change the specified time after scheduling the transmission, you need to delete
the scheduled transmission and then set it again.
Transmitting Faxes to a Fax Server (E-mail Gateway)
You can transmit to a fax server as if you were transmitting to a regular telephone line.
The e-mail gateway settings need to be registered in advance.
For details on registering an e-mail gateway, refer to Chapter 2, "Specifying the Network
Settings" in the Administrator's Guide.
Note
This function cannot be used in the following cases:
•
Real time transmission
•
Polling reception.
•
F-Code transmission
•
Closed transmission
•
ID check transmission
1
Load the document, and press <Fax>.
2
Press [Advanced].
3
Press [E Gateway].
4-16
Various Fax Functions
"Specifying
Destinations".
(See page 3-31.)
(See page 5-2.)