Basic Scan Settings; Setting The Document Type - Muratec MFX-2550 User Manual

Basic Scan Settings

Select the document type, contrast, and resolution, etc. according to the document and its
text.
Note
You can also change the default settings, as necessary.

Setting the Document Type

Set the document type to scan with according to the document.
Text: Select this when you want to scan text.
Auto: Select this when you want to set the document type automatically.
Photo: Select this when you want to scan photos.
1
Load the document, and press <Scan>.
For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
2
Press [Doc.Type].
If [Doc.Type] is not displayed, press [Advanced] and then select [Doc.Type].
1-20

Basic Scan Settings

(See page 7-39.)