Selecting The File Format (File Format) - Muratec MFX-2550 User Manual

Selecting the File Format (File Format)

You can select the file format (TIFF, PDF, etc) for sending.
Available File Formats
For monochrome scanning:
For color scanning:
Encrypted PDF Settings
When you have selected encrypted PDF for the file format, you can also specify the
following settings.
Item
Encryption Level
Printing Allowed
Editing Allowed
Copying Allowed
Open Password
Permissions Password
*1 The encryption levels in order of strength are Low (40-bit RC4), High (128-bit RC4), and
High (128-bit AES).40-bit RC4 is supported by Acrobat 4.0 (PDF 1.3) or later, 128-bit RC4 is
supported by Acrobat 6.0 (PDF 1.5) or later, and 128-bit AES is supported by Acrobat 7.0 (PDF
1.6) or later.
Note
This function can be used in the following cases:
• Scan to e-mail
• Scan to PC Folder
• Scan to FTP Server
• Scan to USB Memory
1
Load the document, and press <Scan>.
2
Press [Advanced].
2-30 Advanced Scan Features
TIFF, PDF, or encrypted PDF
JPEG, PDF, or encrypted PDF
*1
Select Low (40-bit RC4), High (128-bit RC4), or High (128-bit AES).
Select whether to allow the file to be printed.
Select whether to allow the file to be edited.
Select whether to allow the file to be copied.
If you set this password, the password must be entered when opening
the created PDF file.
Up to 28 alphanumeric characters and symbols can be entered for the
password.
Set the password after pressing <Start>.
If you set this password, the password must be entered when printing
or editing the created PDF file. The operations for which the password
is required can be set in Printing Allowed, Editing Allowed, and Copying
Allowed.
Up to 28 alphanumeric characters and symbols can be entered for the
password.
Set the password after pressing <Start>.
Description