Setting The Hold Time (Hold Time) - Muratec MFX-2550 User Manual

Setting the Hold Time (Hold Time)

You can set the storage period (hold time) for documents saved in a box.
Note
• This function can be used with Scan to Box.
• You can set a storage period of 1 to 99 days, or unlimited. The day the data is saved
is not included in the storage period. This means that if you set a storage period of
one day, the data will be stored until the day after the data was saved.
1
Load the document, and press <Scan>.
2
Press [Advanced].
3
Press [Hold Time].
4
Select [ON] to set the storage period, or [OFF] to not set it.
If you selected [OFF], press [Enter] and proceed to step 6.
5
Enter the storage period, and press [Enter].
You can use [], [], and the numeric keys.
6
Press [Close].
2-38 Advanced Scan Features