Muratec MFX-2550 User Manual page 114

2
Press [Advanced].
3
Press [Memory Tx].
• The memory transmission function is enabled / disabled each time you press [Memory Tx].
• Select [ON] to perform memory transmission or [OFF] to perform real time transmission.
4
Press [Close].
5
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
Note
Real time transmission is not possible using the document glass. Even if real time
transmission is set, the machine will automatically switch to memory transmission.
Specifying Destinations". (See page 5-2.)
Basic Faxing
1
2
3
3-29