Using Scantag - Muratec MFX-2550 User Manual

5
Press [Close].
6
Specify the destination, and press <Start>.
For details on the procedure, refer to

Using ScanTag

The ScanTag feature allows you to create image data and metadata (data indicating the
attributes and processing method of the image file) in a single scan. The image data and
metadata will be sent automatically to a network computer.
Note
Set ScanTag before using this function. For details, refer to Chapter 3, "Setting
ScanTag" in the OfficeBridge Guide.
Entering a tag (metadata) at the machine
„
1
Load the document, and press <Scan>.
2
Press the [Apps] tab, and then [ScanTag].
3
Select the
2-40 Advanced Scan Features
ScanTag setting you wish to use.
"Scanning to a User". (See page 1-7.)