Basic Scanning
Scanning to an E-mail Address
You can attach the data for a scanned document to an e-mail for transmission.
1
Load the document, and press <Scan>.
•
For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
•
Set the document type, contrast, and resolution as necessary.
2
Change the file format
entering a message
3
Press the [e-mail] tab.
4
Specify the destination.
For details on specifying the destination, refer to
1-2
Basic Scanning
Internet
Internet
(see page 2-30)
and specify advanced settings such as
(see page
2-22), as necessary.
(See page 1-20.)
"Specifying
Destinations".
(See page 5-2.)