Reading The Transmission Report - Muratec MFX-2550 User Manual

Reading the Transmission Report

10
1
Number
1 Destination
2 Type
3 Mode
4 Start Time
5 Time
6 Page
7 Note
8 Result
9 Details
10 Sender
11 −
*1 When a communication error code and error message is printed, confirm the content of the
error and perform the transmission again. For details, refer to Chapter 4, "Error Messages" in
the Administrator's Guide.
6-4 Checking the Transmission Result (Transmission Report)
2 3 4
Item
The destination name, fax number, or e-mail address
FAX: For fax transmission
IFAX: For Internet Fax transmission
The resolution used for the communication
The time the communication started
The time that elapsed from when the communication started
until when the communication ended
The number of pages transmitted
The type of communication is printed for the following types of
communication:
• Manual Tx
• Polling Tx
• F-Code Tx
• Broadcast Tx
• PC-Fax Tx
• PC-Fax F-code Tx
• Archive Tx
• Rerouted Fax Tx
OK: Completed normally
*: ECM Mode transmission
#: Super G3 transmission
Code: The communication error code
Blank when the communication ends without an error
When a communication error occurs, the error message is
*1
printed
The user name (only when a user is logged in)
The date and time the report was printed
5 6 7 8
Description
11
9
*1