Procedure For Scan To Pc (Smb); Scan To Http - Xerox WorkCentre 7232 System Administrator Manual

13 Scanning Services
Data to Set Up Scan to PC
(SMB)
Server IP address
Server Shared Name
Repository – directory path, where
the document will be stored on the
SMB server
SMB Login/password information
Kerberos IP Address

Procedure for Scan to PC (SMB)

1.
On the control panel, select [Scan to PC].
2.
Enter all the information required.
3.
Load a sample document into the document feeder.
4.
Press the <Start> button on the machine.
5.
Logon to the SMB server. Navigate to the directory path (repository) that was set
up earlier on the server. Your scanned document can be found in the specified
directory.
NOTE: If Kerberos authentication (remote authentication) has been enabled, a
separate login screen appears when the Scan to SMB feature is selected. Documents
are not scanned in unless the Kerberos server authenticates user access.

Scan to HTTP

The device can be configured to scan to either an HTTP or an HTTPS destination. To
set up a remote template pool repository, see the next procedure.
NOTE: See the Quick Scan Features Setup Guide for information about how to set up
templates, repositories, transfer protocols, and enabling ports.
To configure the Scan Repository Details using CentreWare Internet Services:
1.
At your workstation, open your Web browser and enter the IP address of the
machine in the Address or Location field. Press Enter.
2.
Click the Properties tab.
3.
Click the Services folder, then the Network Scanning folder.
142
Install
Requirement
Required
Required
Required
Optional
Optional
Xerox WorkCentre 7232/7242 System Administration Guide
Comments
This is the IP address of the SMB server.
This is the name assigned to the shared
folder on the SMB server.
This is the location or path of the directory for
saving scanned documents.
This is required, if the SMB server requires
login/password authentication. Most SMB
servers require a login/password.
If Remote Authentication is required, then
Kerberos needs to be enabled.