Test Print - Xerox WorkCentre 7232 System Administrator Manual

10 USB Port
1.
Refer to the HTML document in PCL Print Driver CD-ROM or document provided
with the optional PostScript Kit, and install the print drivers for the machine on the
workstation that will be sending jobs to the machine.
2.
Connect the USB cable to the machine and the workstation.
3.
Continue with Test Print on page 114.

Test Print

To make sure that the machine has been installed on the USB port correctly, submit a
test print from each client workstation. Perform the following steps.
1.
Open a document on a workstation.
2.
Select the machine as the printer.
3.
Print the document on the machine and verify that it prints correctly.
4.
Repeat the test for all workstations that will be sending jobs to the machine.
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for assistance.
114 Xerox WorkCentre 7232/7242 System Administration Guide