Xerox WorkCentre 7232 System Administrator Manual page 32

2 Product Overview
Print Mode
This feature allows you to change the default printer mode and emulation parameter
settings.
1.
Select [Print Mode] on the [Machine Information] screen.
2.
Select the required option.
• Off-line – Takes the printer off-line. The printer is unavailable in this mode.
• On-line – Puts the printer on-line, ready to accept data.
• PCL Emulation – Allows you to set parameter values for PCL emulation to print
documents.
• HP-GL/2 Emulation – Allows you to set parameter values for HP-GL/2 emulation to
print documents. It also allows you to store, retrieve, and delete up to 20 emulation
settings.
– Retrieve Programming – Retrieves emulation settings and makes them active.
– Programming – Allows you to set emulation parameter item values.
– Store/Delete Programming – Allows you to store user-programmed emulation
mode parameters on the machine.
– Default Programming – Sets the default emulation mode settings when the
machine is turned on.
• PDF – Allows you to set parameter values and a password for PDF direct printing.
– Setup – Allows you to set emulation parameter item values for PDF direct
printing.
– Password – Allows you to enter a password to restrict access to PDF direct
printing.
Fax Receiving Mode
This feature allows you to set the fax reception mode: Manual Receive or Auto Receive.
NOTE: This feature is available only when the Server Fax feature is enabled.
1.
Select [Fax Receiving Mode] on the [Machine Information] screen.
2.
Select the required option.
• Manual Receive – Starts receiving a fax or polling after you have answered the call
and confirmed it is a fax.
• Auto Receive – Receives a fax automatically.
Billing Information
This section describes the features that allow you to view the billing meter information,
and also specify the output sequence for various reports and lists.
1.
Press the <Machine Status> button on the control panel.
22 Xerox WorkCentre 7232/7242 System Administrator Guide