Xerox WorkCentre 7232 System Administrator Manual page 103

B4D/b4d
B4T/b4t
A5D/a5d
A5T/a5t
B5D/b5d
B5T/b5t
NOTE: If several parameters are specified in an lpr command, data may not print
correctly.
NOTE: The system default is used if no parameter is specified.
NOTE: If the print data specifies double-sided or single-sided printing, those
specifications take priority over any -C option.
Specifying collation
The following parameter can be specified.
COLLATE/collate
NOTE: For some print languages, the collation parameter may be invalid.
Specifying color and print modes
The following color and print mode parameters can be specified.
Parameter
GC/gc
GB/gb
NOTE: If several parameters are specified in the first lpr command, data may not print.
NOTE: For some print languages, the color parameter may be invalid.
NOTE: The system default is used if no parameter is specified.
Xerox WorkCentre 7232/7242 System Administration Guide
Parameter
Parameter
Selects monochrome for color mode and quality priority for print mode.
Selects monochrome for color mode and speed priority for print mode.
Description
Double-sided printing on B4 (257 × 364 mm/10.1 × 14.3
inches) paper and long-edge binding
Double-sided printing on B4 (257 × 364 mm/10.1 × 14.3
inches) paper and short-edge binding
Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3
inches) paper and long-edge binding
Double-sided printing on A5 (148 × 210 mm/5.8 × 8.3
inches) paper and short-edge binding
Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1
inches) paper and long-edge binding
Double-sided printing on B5 (182 × 257 mm/7.2 × 10.1
inches) paper and short-edge binding
Description
Sorts prints electronically.
Description
-C Option
93